External infill panels

GASBETON® ACTIVE
for non-load-bearing masonry

This block does not require additional thermal coats and maximises thermal insulation in both winter and summer, for passive and building masonry.

It is currently the most insulating material on the market (300 kg/m³) and allows the construction of curtain walls on framed structures with thermal performance similar to insulating materials, thanks to conductivity values of 0.07 W/mK, while maintaining the highest level of acoustic insulation performance and thermal inertia, without the need for additional insulating materials. GASBETON® ACTIVE was created to offer a specific response to building demands, which are increasingly sensitive to the issues of eco-sustainability, energy savings and living comfort in both the winter and summer months.

Blocks for external walls, smooth or with tongue and groove joints.

Measurements
Dimensions: 60 x 25 cm ((length x height)
Thickness: from 5 to 50 cm

External infill panels

GASBETON® ENERGY
for non-load-bearing masonry

Blocks that optimise thermal and acoustic insulation performance for single-layer curtain walls.

Characterised by an excellent insulation value (350 kg/m3), it allows the construction of infill masonry on framed structures with thermal performance similar to insulating materials, thanks to conductivity values of 0.08 W/mK, while maintaining the highest level acoustic insulation performance and thermal inertia, without the need for additional insulating materials. GASBETON® ENERGY is a specific response to building demands, which are increasingly sensitive to the issues of eco-sustainability, energy savings and living comfort in both winter and summer months.

Blocks for external walls, smooth or with tongue and groove joints.

Measurements
Dimensions: 60 x 25 cm ((length x height)
Thickness: from 20 to 40 cm

Load-bearing masonry

GASBETON® SYSMIC
for load-bearing masonry

Blocks with a load-bearing capacity of more than 50 kg/cm2, specifically designed for load-bearing walls in seismic zones.

Characterised by an excellent insulation value (350 kg/m3), it allows the construction of infill masonry on framed structures with thermal performance similar to insulating materials, thanks to conductivity values of 0.08 W/mK, while maintaining the highest level of acoustic insulation performance and thermal inertia, without the need for additional insulating materials. GASBETON® ENERGY is a specific response to building demands, which are increasingly sensitive to the issues of eco-sustainability, energy savings and living comfort in both the winter and summer months.

Measurements
Dimensions: 60 x 25 cm (length x height)
Thickness: from 24 to 30 cm

Load-bearing masonry

GASBETON® ACUSTIC
for sound-insulating partitions

Blocks that maximise insulation between neighbouring environments

GASBETON® ACUSTIC is especially appreciated because, in addition to its soundproofing capabilities, it retains all the benefits of GASBETON®: rapid installation, fire resistance, thermal insulation, certified healthiness and environmental sustainability

Measurements
Dimensions: 60 x 25 cm (length x height)
Thickness: from 8 to 12 cm

Thermal break

GASBETON® IDRO
Reduces thermal bridges and ascending moisture!

The faithful friend of a healthy home with a dry wall. A special version of GASBETON® mass water repellent is used to cut out capillary ascending moisture from the ground and reduce thermal bridges at the base of traditional masonry.

From the functional need to reduce thermal bridges at the base of traditional masonry and, at the same time, the transmission of any ascending moisture, comes the new IDRO Block.

In addition to its excellent thermal insulation power and high compressive strength, this product offers much lower absorption values compared to standard blocks, thanks to the use of special waterproofing agents evenly distributed throughout the entire volume of the block.

Fields of application: IDRO blocks are ideal for the construction of the first course of bricks at the base of traditional masonry and in GASBETON® to inhibit moisture and, at the same time, reduce linear thermal bridges. It is suitable both for internal partitions and external walls, including load-bearing in seismic zones. It is useful in basements, ground floors, and in all areas where there are balconies or terraces with a danger of water stagnation.

Idro Evolution Measurement
Dimensions: 60 x 25 cm (length x height)
Thickness: from 8 to 50 cm

Idro Sysmic Measurement
Dimensions: 60 x 25 cm (length x height)
Thickness: from 24 to 40 cm